1.開機前檢查各部件連接是否正確可靠。

1. Before starting up, check if all components are connected correctly and reliably.

　　2.打開電源開關。

2. Turn on the power switch.

　　3.按啟動鍵。

3. Press the start button.

　　4.按下"開始"按鈕。

4. Press the "Start" button.

　　5.根據所需噴涂的面積調整好氣壓。

5. Adjust the air pressure according to the required spraying area.

　　6.調節氣壓大小。

6. Adjust the air pressure.

　　7.選擇適當?shù)耐苛稀?/p>

7. Choose the appropriate coating.

　　8.按動主電機按鈕。

8. Press the main motor button.

　　9.待涂料在管道內流動并達到設定值時即可關閉電源。

When the paint flows inside the pipeline and reaches the set value, the power can be turned off.

　　10.停機時應先停止進料后再切斷總電源。

10. When shutting down, the feeding should be stopped first before cutting off the main power supply.

以上就是有關：玻璃涂布機設備 的介紹，想了解更多的內容請點擊：http://m.xavoip.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to the glass coating machine equipment. To learn more, please click: http://m.xavoip.com We will wholeheartedly provide you with full score service. Welcome to call us!