
雙組份密封膠的固化需要一定時間
時間:2018-04-03 來源:http://m.xavoip.com/ 發布人:昌盛機械
1.由于雙組份密封膠的固化需要一定時間,因此雙組份打膠機,已涂了雙組份密封膠的玻璃應水平輕輕搬動。
1., since the curing of two component sealants takes a certain time, the two component glue machine has been coated with two components of sealant glass and should be moved gently.
2.A組、B組份膠應保持清潔,嚴防異物進入膠中。
Group 2.A and B components should be kept clean, and foreign matters should be strictly prevented from entering the glue.
3.在連續工作過程中,膠槍每次停止工作時間一般不得超過20分鐘,否則,應用A組份膠沖出全部混合膠,直至單一的A組份膠從槍口排出為止。
3. in the continuous working process, the glue gun will not stop working more than 20 minutes each time. Otherwise, all the mixed glue is washed out with A component glue until the single A component is discharged from the muzzle.
4.高壓膠管不得強行擠壓、彎曲,防止影響系統正常工作。

4., high pressure hose should not be forced to bend or bend to prevent the system from functioning normally.
5.混膠器應經常保持暢通,以保證良好的出膠效果。如遇堵塞情況,可用丙酮浸泡后清洗。建議每5組清洗一次。
5., rubber mixer should be kept regular and smooth, so as to ensure good glue production. In case of clogging, acetone can be soaked and cleaned. It is suggested that every 5 groups be cleaned once.
6.當膠槍長時間不用時(超過一周),應拆下槍體使用溶劑將膠槍和混膠器內的殘留膠體清洗干凈。
6., when the glue gun is not used for a long time (more than a week), the gun body should be removed and the residual colloid in the glue gun and glue mixing machine should be cleaned with solvents.
7.不同雙組份膠生產廠家所生產的膠內含雜質數量不同,根據實際情況清晰B組分的過濾網及單向止回閥,建議每兩組清洗一次.
7. the number of impurities in the rubber produced by the different double component rubber manufacturers is different. According to the actual situation, the filter net and the one-way check valve of the B component are clear. It is suggested that every two groups be cleaned once.
本文由雙組份打膠機為您提供,我們的網站是:http://linshi.jncsjx.com我們將以全心全意的熱情為您提供更優質的服務,歡迎您的訪問!
This article is provided by the double component glue machine for you. Our website is: http://linshi.jncsjx.com we will provide you with more quality service and welcome your visit with wholehearted enthusiasm.
- 避坑!中空玻璃加工設備選不對,60%產能浪費+品質不達標,看完少走彎路 2026/04/13
- 中空玻璃加工設備升級,4大核心革新,解決清洗刮傷、干燥不徹底8大痛點 2026/04/08
- 中空玻璃生產線避坑!傳送帶3大核心優勢,零劃痕+高平穩,產能提升35%不返工 2026/04/07
- 中空玻璃生產線:清洗段全面升級,嬌貴玻璃清洗接近零損傷 2026/04/06
- 中空玻璃加工設備革新:一體鈑金框架告別焊接,穩到零偏差,次品率直降 2026/03/27
- 丁基膠涂布機:中空玻璃氬氣鎖鮮關鍵!實測底部99.9%,邊緣95.6%全達標 2026/03/26
- 山東玻璃廠必看!大小片中空玻璃全自動封膠線,告別殘膠返工,打膠零瑕疵 2026/03/26
- 昌盛中空玻璃生產線:充氣超93%+出口俄羅斯,大玻璃穩、封膠嚴,老客戶轉介紹不斷 2026/03/25
- 雙組份打膠機:中空玻璃省工利器,全自動密封成型,告別人工短板 2026/03/25
- 全自動封膠線:三項智能節能黑科技,玻璃廠年省電費超30% 2026/03/24
產品分類Product categories
聯系我們Contact us
- 咨詢熱線:0531-85717458 13705446998
- 公司地址: 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們:

當前位置:



